Skip to content
Winter Storm GearField guide
Guides menu67 guides

Snow and iceHow-to8 sources

Snow Blower Parts: What Wears Out First and How to Match It

The snow blower parts that wear out most, from shear pins and paddles to skid shoes and belts, and how to find the right one from your model number.

We earn from qualifying purchases through links on this page.

A man in a green jacket clearing deep snow with a red two-stage snow blower

Quick reference5 facts

Shear pins (Ariens)Built to break when the auger jams, to protect the gearcase
Single-stage paddles (Toro)Replace the rotor blades and scraper once the wear-indicator hole is exposed
Skid shoes (Ariens)Flip them first; replace once both sides wear through
Belts (Ariens)Frayed edges, a shiny glazed face or cracks mean it is time to replace
Before any repairEngine off, key out, spark plug wire disconnected
On this page (6 sections)
  1. Find the snow blower model number before you order
  2. Shear pins: the snow blower part designed to break
  3. Paddles and scraper on single-stage snow blowers
  4. Scraper bar and skid shoes on two-stage machines
  5. Belts: the slow snow blower failure
  6. Plan snow blower repairs before the first storm

On most snow blowers, the parts that wear out first are the ones that touch snow, ice and pavement: shear pins on two-stage machines, rubber auger paddles on single-stage ones, the scraper bar, skid shoes and belts. To get the right replacement, find the machine’s model number on its tag and order by that number, not the brand alone.

Find the snow blower model number before you order

Snow blower parts are model-specific, even within one brand. Simplicity says knowing the model number of your engine or product makes it easy to order parts and download the operator’s manual or illustrated parts list. On its own snow blowers, the product label sits in the center or on the right-hand side of the base, where the handlebars attach, when you stand behind the unit. Other brands, Murray included, put the tag in different places, so the owner’s manual is the quickest guide.

The engine carries a second number. Briggs & Stratton says its engine model number is usually stamped into metal on the engine itself: on the overhead valve cover, the metal shield below the muffler or the cylinder shield. It may also be on a label by the starter or on the rewind housing.

Two numbers, two kinds of part

Use the machine’s model number for augers, paddles, belts, skid shoes and the scraper bar. Use the engine’s model number for engine parts such as spark plugs, carburetor parts and filters. Take a phone photo of both tags before the season starts.

Shear pins: the snow blower part designed to break

Ariens says every two-stage snow blower has at least one shear pin on each side of the auger gearcase. The pin, also called a shear bolt, is a deliberately weak bolt that connects the auger to the auger shaft. If a rock jams the auger, the pin snaps, so the shaft and gearcase keep turning undamaged. Ariens lists rocks, large gravel, branches, newspapers, toys and curbs among the objects to clear before you start.

A broken pin shows up quickly: the machine pushes snow instead of throwing it, or snow builds up at either side of the auger housing. Ariens notes that pins are much cheaper to replace than an auger or gearcase, and recommends keeping spares on hand.

Replacing one is quick. Ariens says that usually only half of a broken pin falls out and the other half stays in the auger shaft. Rotate the auger until its holes line up with the holes in the shaft, push the stub out with a thin screwdriver, then fit the new pin and tighten its nut to the torque in your manual.

Paddles and scraper on single-stage snow blowers

A single-stage machine throws snow with a rubber auger, which Toro calls rotor blades, that touches the pavement as it clears. That contact wears it down. Toro’s Power Clear manual says to check the blades before each use: once a blade edge has worn down to its wear-indicator hole, the rotor blades and the scraper both need replacing. Toro’s manual directs owners to an authorized service dealer for this job.

If you are still deciding between machine types, our single-stage vs two-stage snowblower guide explains how each one clears, and our snow blower brands comparison shows how the major makers organize their lineups. Tractor-mounted throwers have their own fitment rules, covered in snow blower attachments.

Scraper bar and skid shoes on two-stage machines

The scraper bar runs along the bottom of the auger housing and scrapes up the last of the snow. Ariens calls it sacrificial: it wears against the ground by design. Skid shoes, one on each side of a two-stage housing, hold it at the right height.

A man pushing a green two-stage snow blower through deep snow on a rural road, its yellow auger turning inside the housing
On a two-stage machine, the scraper bar sits along the bottom edge of this auger housing.
Part Machine Signs it is worn What the makers suggest
Shear pin Two-stage Machine pushes snow; auger does not turn Keep spares; fit only the listed pin
Rotor blades (paddles) Single-stage Wear-indicator hole exposed Replace with the scraper (Toro)
Scraper bar Both Snow left behind even when adjusted all the way down Adjust first, then replace (Ariens)
Skid shoes Two-stage Worn through Flip to the unworn side, then replace (Ariens)
Auger belt Most gas models Frayed edges, glazed face, cracks; snow thrown short Check tension first, then replace (Ariens)

Ariens says that when more snow is left behind than before, the scraper bar needs adjusting, and once it is as low as it goes and still misses snow, it needs replacing. Its skid shoes can be flipped to the other side once, then replaced when both sides wear through.

Skid shoes also set the clearing height. On gravel, Ariens says to lower the skid shoes, which raises the housing and scraper bar so the machine does not pick up stones. It suggests 1/2-inch spacers under the scraper bar for gravel and 1/8-inch spacers for pavement while you set the shoes.

New snow blower shear pins, paddles, skid shoes and belts

Shop snow blower parts

Opens eBay in a new tab. Check condition, seller feedback and returns.

Belts: the slow snow blower failure

Belts wear gradually. Ariens lists three signs that a belt is due for replacement: frayed edges with little hairs along the sides, a shiny glazed face from slipping on the pulleys, and cracks across the face as the rubber ages.

A machine that throws snow shorter than it used to often has a belt that no longer grips its pulley. Ariens says this can come from a worn belt or from too little tension, and suggests tightening the auger clutch cable or adjusting the idler first, then replacing the belt if neither helps. Husqvarna’s advice for a worn or damaged auger belt is to replace it with the correct one, following the operator’s manual.

When you replace a belt, photograph its routing before you take the old one off, and order by the machine’s model number.

Before you reach into the housing

Ariens says to stop the engine, remove the key and disconnect the spark plug wire before working on the auger. To clear a clog, Toro’s manual says to shut the engine off and use a clean-out tool, never your hands. CPSC says clearing the discharge chute by hand is when most snow blower injuries happen.

Plan snow blower repairs before the first storm

The best time to change a belt or paddle is a dry fall weekend, not the morning of a storm. Check the shear pins, paddles, scraper bar, skid shoes and belts once before the season and order anything worn. For the jobs a snow blower cannot do, see our guides to snow shovels and ice melt vs rock salt.

More snow clearing guides are in the snow and ice section.

Frequently asked questions

Can I use a regular hardware-store bolt instead of a shear pin?

No. Ariens describes a shear pin as a weak bolt with a built-in weak point that snaps when the auger jams, so the gearcase keeps turning undamaged. A stronger bolt will not snap, so the force goes into the gearcase instead. Buy the pin listed for your model.

Where is the model number on a Murray snow blower?

Look for a label or metal plate on the machine itself, and check the owner's manual, which shows where it sits on your model. The engine has its own, separate model number: on Briggs & Stratton engines it is usually stamped into the metal of the engine.

Why does my snow blower run but not throw snow?

On a two-stage machine, check the shear pins: Ariens says a machine with a broken pin pushes snow instead of throwing it, or leaves snow piling up at the sides of the housing. If it throws snow short rather than not at all, Ariens points to an auger belt that is worn or not tight enough to grip its pulley.

How do I set skid shoes for a gravel driveway?

Lower the skid shoes to raise the housing and scraper bar off the gravel. Ariens suggests putting spacers under each side of the scraper bar, about 1/2 inch thick for gravel and 1/8 inch for pavement, then loosening the shoes, setting them on the ground and tightening them.

Sources

  1. What Are Shear Pins and Why Do I Need Them?Ariens
  2. Snow Blower Maintenance TipsAriens
  3. How to Improve Snow Blower PerformanceAriens
  4. Power Clear 518 Snowthrower Operator's ManualToro
  5. Faulty auger beltHusqvarna
  6. How to Find Your Snow Blower Engine Model NumberBriggs & Stratton
  7. How To Locate Your Model NumberSimplicity
  8. Let it Snow and Play it Safe This Winter; CPSC Offers Tips to Prevent Injuries While Enjoying Outdoor ActivitiesU.S. Consumer Product Safety Commission

Filed under Snow and icePart of Snow and Ice Removal: Shovels, Snowblowers, Ice Melt, Roof Rakes

Affiliate disclosure

Winter Storm Gear is reader-supported. Some links on this page are affiliate links: when you buy through them, we may earn a commission at no extra cost to you. As an eBay Partner, we may be compensated if you make a purchase through our links. Commissions never decide what we recommend or how we rank it. Listings and prices come from our partners and change often, so check the price, condition and seller on the retailer's page before you buy. Read how we make money.